|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet TOP View LEDs With Lens (Preliminary) 67-11B/T7C-MX1Y2M/BT Features PLCC-2 package. High flux output. High current capability. White package. Optical indicator. Colorless clear window. Ideal for backlight and light pipe application. Inter reflector. Suitable for automatic placement equipment. Suitable for reflow and wave solder processes. Available on tape and reel (12mm Tape). Pb-free. The product itself will remain within RoHS compliant version. Descriptions The 67-21B series is available in soft orange, red and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the 67-21B series LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications Indicator and backlight for audio and video equipment. Indicator and backlight in office and family equipment. Flat backlight for LCD's, switches and symbols. Light pipe application. General use. Device Selection Guide Chip Lens Color Material InGaN Emitted Color Pure White Water Clear Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 1 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT Package Dimensions C L 2.20.1 2.80.2 + Polarity - C L 3.250.2 3.0 For reflow soldering (propose) Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 2 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT Absolute Maximum Ratings (Ta=25) Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Electrostatic Discharge (HBM) Power Dissipation Peak Forward Current(Duty 1/10 @ 1KHz) Symbol VR IF Topr Tstg ESD Pd IFP Tsol Rating 5 30 -40 ~ +85 -40~ +90 2000 110 100 Unit V mA V mW mA Reflow Soldering : 260 for 10 sec. Soldering Temperature Hand Soldering : 350 for 3 sec. Electronic Optical Characteristics (Ta=25) : Parameter Luminous Intensity Viewing Angle Forward Voltage Symbol Iv 21/2 VF Min. 1800 ----2.75 Typ. ----60 ----- Max. 3600 ----3.95 Unit mcd deg V Condition IF=20mA IF=20mA IF=20mA Notes: 1.Tolerance of Luminous Intensity 10% 2.Tolerance of Forward Voltage 0.1V Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 3 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT Bin Range Of Dom. Wavelength Groups X1 X2 Y1 Y2 Groups Bin 5 M 6 7 8 Min 1800 2250 2850 3600 Max 2250 2850 3600 4500 Unit Condition mcd IF=20mA Bin Range Of Forward Voltage Min 2.75 3.05 3.35 3.65 Max 3.05 3.35 3.65 3.95 V IF=20mA Unit Condition Notes: 1.Tolerance of Luminous Intensity 10% 2.Tolerance of Forward Voltage 0.1V Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 4 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT Chromaticity Coordinates Specifications for Bin Grading Group Bin Code CIE_x 0.291 0.287 0.297 0.300 0.300 0.297 0.307 0.309 0.272 0.264 0.276 0.282 0.282 0.276 0.287 0.292 0.32 0.31 CIE_y 0.286 0.295 0.305 0.295 0.295 0.305 0.315 0.305 0.258 0.267 0.281 0.272 0.272 0.281 0.295 0.286 Bin Code CIE_x 0.296 0.292 0.300 0.304 0.304 0.300 0.309 0.311 0.280 0.272 0.282 0.288 0.288 0.282 0.292 0.296 CIE_y 0.276 0.286 0.295 0.285 0.285 0.295 0.305 0.294 0.248 0.258 0.272 0.262 0.262 0.272 0.286 0.276 B5-1 B5-3 B5-2 M A0-1 B5-4 A0-3 A0-2 A0-4 B5-2 0.30 B5-1 0.29 0.28 B5-4 A0-2 A0-4 B5-3 y 0.27 0.26 0.25 0.24 0.26 A0-1 A0-3 0.27 0.28 0.29 0.30 0.31 x Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 5 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 6 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 7 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT Carrier Tape Dimensions: Loaded quantity 500 PCS per reel. Polarity Note: The tolerances unless mentioned is 0.1mm Unit = mm Moisture Resistant Packaging + Label Everlight Electronics Co., Ltd. Device No. : Aluminum moisture-proof bag Desiccant Label http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 8 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. 1 Items Reflow Soldering Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS. Ac/Re 0/1 2 Temperature Cycle 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 0/1 4 5 6 7 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 9 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 10 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 11 of 10 Prepared by:Rita Shen |
Price & Availability of 67-11B-T7C-MX1Y2M-BT |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |